Fire Safety Awareness Training Day 2- 14/04/09

2nd day of the Fire Safety Awareness Training. We did our morning run around the block, then we started out with basic drill of unrolling and rolling of the fire hose. After that we did the Hydrant 1 Drill. In the morning we did the dry run, without any water running.

that hose on the shoulder weighs 17kg and we had to run 90m with it.

rolling the hose

unrolling the hose

giving the command and signal of turning off the water

holding the nozzle. More photos here.

In the afternoon, we had the wet run of Hydrant 1 Drill. This was a bit harder as we did it live. They pumped the water and that made the hose heavier.

giving the command and signal to open for turning on water hydrant while running

getting in position

draining water from the hose

rolling the hose

unrolling the hose *you have to run*

draining water out of the hose *running as well*

I like this part... playing with water.. I meant spraying water

if you make a mistake *especially command* yu do push-ups on the spot
luckily.. I never did any mistakes, so I never did any push-ups ;)

AdamBJ giving the command and signal of turning on the water

Andi checking the coupling

releasing the coupling joints

Ucingitam spraying water. More photos here.

After our wet run of the Hydrant 1 Drill, we were briefed on the theory of fire evacuation techniques and as well as saving or removing victims to a safer location.

These are examples of ways to remove victims to a safer location. More photos here.

The 3 BFF members during the training. More photos here.